|
Title
|
Location
|
Compensation
|
Date/Time
|
tool bag/belt.......large - $30 (wasilla) (pic)
 |
wasilla |
|
2009-07-16 12:42PM |
|
this is a large tool belt / bag.... either way you want it. it has the belt that goeas with it, and if you want to use it as a bag then it vencros together and there you go. then it is as simple to pull apart to care on you as a tool belt...... tons of pockets and clips to hold most anything..... used it couple time then went back to turnin wrenches for a living.just dont need it anymore.jason= 715-1926 Location: wasillaits NOT ok to contact this poster with services or other commercial interests |
|
Commercial extension ladder - $25 (Anchorage) |
Anchorage |
|
2009-07-16 12:24PM |
|
Twenty foot aluminum. Safety rated for 225 pounds. Leaving state., Cash only. Call Bob@ 337 3535 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
ShopSmith Mark V - $1000 (North Pole) (pic)
|
North Pole |
|
2009-07-16 2:51PM |
|
Mark V shop smith (all standard attachments) very good condition. lathe,drill press, table saw, disk sander call Robert @ 488 3301 or cell 687-1374 Location: North Poleits NOT ok to contact this poster with services or other commercial interests |
|
Werner 12' folding ladder - $125 - $125 (Fairbanks) (pic)
|
Fairbanks |
|
2009-07-16 2:49PM |
|
Werner 12 folding ladder - $125Werner Articulated folding ladder. 6 step ladder, 12 straight ladder.18 different positions, can be used as base for scaffolding for work bench.In great shape!!Asking $125 obo Please call 907-474-0313, Fairbanks Area Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests |
|
Lincoln AC-225 Arc Welder w/ Accessories - $225 - $225 (Fairbanks) (pic)
|
Fairbanks |
|
2009-07-16 2:48PM |
|
Lincoln AC-225 Arc Welder w/ Accessories - $225Lincoln AC-225 Arc Welder w/ Accessories This is an AC ONLY welderPractically new, includes 2 hoods, a pair of gloves, two full and one partial box of electrodes, chipping hammer, 240 volt cord for different plug in and a wheeled cart to move it around on. Used less that 2 hours. Around $310 at Lowes without extras. Asking $225.00 cash only please call 907-474-0313, Fairbanks Area Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests |
|
Drill press on mount - $100 (S. Anchorage) (pic)
|
S. Anchorage |
|
2009-07-16 2:42PM |
|
1/3 hp variable speed with mount attached Location: S. Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
A/C recharge unit R12 w/tank/guages - $200 (S. Anchorage) (pic)
|
S. Anchorage |
|
2009-07-16 2:37PM |
|
Snapon ACT 3120 recharge & recycle unit, guages include, 1/3 tank of R12 Location: S. Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
Tool Boxes for sale - $650 - $650 (Fairbanks) (pic)
|
Fairbanks |
|
2009-07-16 2:35PM |
|
Tool Boxes for sale - $650A set of Huskey tool boxes in great shape, The red stacked pair for $400The black box for $300Take all of them for $650Some tools for sale also, sold separately.Asking $650 cash only - 907-474-0313 - Fairbanks Area Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests |
|
10" Radial Arm Saw - $300 (1226 W 10th, Anchorage) |
1226 W 10th, Anchorage |
|
2009-07-16 2:13PM |
|
Sears best 10\" radial arm saw with assorted blades and dado heads, on a stand . Call 272-6249 Location: 1226 W 10th, Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
COMMERCIAL ELECTRIC UTILITY LIGHT (WASILLA) |
WASILLA |
|
2009-07-16 2:10PM |
|
Commercial Electric Utility LightTripod baseRotating LightsAdjustable BrightnessGently UsedGarage kept$75 Location: WASILLAits NOT ok to contact this poster with services or other commercial interests |
|
HOMELITE BACKPACKER BLOWER - $75 (WASILLA) |
WASILLA |
|
2009-07-16 2:03PM |
|
Homelite Backpacker BlowerMighty Light 26 bpOriginally $180 from Home DepotGently Used and garage keptAsking $75 FirmPic availCall 907-315-4917or respond to ad Location: WASILLAits NOT ok to contact this poster with services or other commercial interests |
|
tools/ water tank (wasilla ak) |
wasilla ak |
|
2009-07-16 2:03PM |
|
tool boxes for truck bed (2) $50/ table saw 10\" $25/ industrial bench drill press $25/ 12 ton shop press $100/ 5 speed drill press with black & Decker grinder & face mask $250/ Homelite 160 water pump- 2 sets of hoses $350/ ASK FOR TOM@ 373 - 3667. no calls after 9 pm. PRICES ARE OPEN TO NEGOIATION. Location: wasilla akits NOT ok to contact this poster with services or other commercial interests |
|
DeWALT HEAVY-DUTY PRESSURE WASHER 3800 PSI 4.0GPM - $400 (WASILLA) |
WASILLA |
|
2009-07-16 1:56PM |
|
DeWalt HEAVY-DUTY Pressure WasherBought from Home Depot 1 year ago for $999Gently used, garage kept, and all attachments presentAsking $400 FIRMPIC AVAIL TO EMAILOr call 907-315-4917 Location: WASILLAits NOT ok to contact this poster with services or other commercial interests |
|
****** tools for sale ****** (palmer) |
palmer |
|
2009-07-16 1:50PM |
|
mech. tools , carpenter tools , call 907-232-8940 Location: palmerits NOT ok to contact this poster with services or other commercial interests |
|
**** 2-plunge routers ***** (palmer) |
palmer |
|
2009-07-16 1:49PM |
|
2-plunge routers , 1 is a craftsman in a case 80.00 , the other is a skill 50.00 both run and work great , call 232-8940 Location: palmerits NOT ok to contact this poster with services or other commercial interests |
|
New 18V DeWalt Batteries & Charger - O.B.O. - $120 (Anchorage) (pic)
|
Anchorage |
|
2009-07-16 1:36PM |
|
One brand new battery and one used several times. Both batteries have full memory for power, charger included. Drill was stolen and no need for batteries.Will trade for a 22 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
Hobart Welder - $125 (Anchorage) |
Anchorage |
|
2009-07-16 1:17PM |
|
I have a Hobart Welder, aged but not used for than 25 hrs. Available @ tent sale Sat/Sun, 7/18 & 19, 10am-4pm. on Birch Road btn Omalley and Huffman. Look for the sign. Location: Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
Tool box with tools - $800 (Anch) |
Anch |
|
2009-07-16 11:57AM |
|
I have a tool box FULL of tool nuthing brand new or not all name brand but still lots to bold off of. There is 1/2inch. 3/8 & 1/4inch. Sawall drill some air tools and more. I dont have room to keep it no more and wood like to see it go soon. I know its not the best looking box but it works just fine and with the tools it comes with makes it a gray set for the do it your selfer and save ya some cash getting all it comes with. Im asking $800.. O.B.O. And opin for bardering on part or all. Atv jeep stuff maybe gold mineing things I dont know what you got. I can send more pics. If asked but if intrested it MIT just be e-z-er to come look at it. I cant post a pic. Off my phone but can email one. Sorry just figerd that out. So email or call Mike at 744-0216Thinks Location: Anchits NOT ok to contact this poster with services or other commercial interests |
|
Ridgid 1822-I Pipe Threader 815a NEW DIE 4-6" w 141 161 - $3650 (pic)
|
|
|
2009-07-16 11:37AM |
|
YOUR LOOKING A USED BUT NEWER 1822-I RIDGID THREADER, IN \"VERY NICE CONDITION\"! IT COMES WITH A 815A SELF OPENING, SELF OILING DIE HEAD LOADED WITH DIES 1/2\"-3/4\"AND A NEW SET OF 1\"-2\", WITH THE THROUGH THE HEAD OILING SYSTEM (this means as the pipe is being threaded, oil is automatically pumped through the die heads keeping the cutting teeth bathed in oil and when the threading is done, the die head automatically opens, so you can back off the carriage without having to reverse the threader or open the die head manually! This saves a full step and probably cuts the time to thread a pipe by 25%!). THIS UNIT ALSO HAS AN AUTOMATIC CHUCKING SYSTEM THAT CHUCKS DOWN ON THE PIPE WITH THE FLIP OF A SWITCH AND UNLOCKS, OR UNCHUCKS WITH A FLIP OF THE REVERSING SWITCH. THIS UNIT INCLUDES A RIDGID COLLAPSABLE ROLLING WHEEL STAND! ALL DIE TEETH ARE PERFECT, NO CHIPS AND ONE SET IS NEW! There is a fracture on the plastic around the oil/chip strainer. Cosmetic only and doesnt affect the return of oil to the reservoir, but wanted to make sure it was mentioned. See the last pic.... THIS UNIT CAN ALSO THREAD UP TO 4\"-6\" PIPE WITH AN ADDITIONAL ATTACHMENT OF A RIDGID 141, OR RIDGID 161 PIPE THREADER (not included) SEE THE LAST PICS SHOWING INSTRUCTION MANUAL (manual included)! THIS UNIT \"NEW\" LISTS FOR $4,533.72 WITHOUT THE STAND! ADD ON AN ADDITIONAL $896.00 FOR A RIDGID STAND! THEN ANOTHER ANOTHER $125.00 FOR THE OTHER SET OF DIES... FOR A GRAND TOTAL BEFORE SALES TAX OF $5,554.72! NOT HERE!... YOU CAN BUY IT HERE FOR ONLY $3,650.00! INCLUDING SHIPPING! SAVING YOU $2,000.00+ OVER THE PRICE OF A NEW ONE, AT A LOW COST INTERNET RIDGID DEALER! THE PRICE LISTED INCLUDES PALLETIZING AND SHIPPING! IF YOU WANT TO PICK IT UP WE CAN GIVE YOU AN EVEN BETTER PRICE! WE HAVE OTHER RIDGID PIPE THREADERS (1224, 535, 300,700, 1822S) AVAILABLE AND GREENLEE CONDUIT BENDERS (555S, 855)AND ENERPAC CONDUIT BENDERS! YOU CAN REACH US AT 815-963-1234. THANKS! its NOT ok to contact this poster with services or other commercial interests |
|
Generator - Coleman Power Mate 1500 Electric Generator ~ Superior Cond - $300 (Robin Street, off Muldoon & 36th Ave.) |
Robin Street, off Muldoon & 36th Ave. |
|
2009-07-16 10:17AM |
|
This Coleman Power Mate 1500 Electric Generator has been well kept in great working condition!Has been run a few times in its lifetime and work well and for a long period of time.Runs nice and quiet for camping and sporting purposes.Outputs a superior 120 Volts, 10 amps, 1500 Watts for all household, apliance, and emergency needs.Recoil Start.Originally purchased at Lowes for $490.00Asking $325.00 ~ Super Deal! *Cash onlyNo E-mails Please!Call #:333-7880 ~ Ask for BillNOTE:There are many rewards to buying an electric generator. When the electricity goes out, there is a good chance that you will not have the ability to cool food, heat food, use your computer, utilize the internet, make phone calls, recharge your cell phone, or watch TV. An electric generator can provide you with the electricity you need during a blackout. When buying an electric generator, its important to think about the amount of watts it is capable of putting out. You might also talk with an electrician to assist you to instal your generator so that it is capable of running a refrigerator or television. Location: Robin Street, off Muldoon & 36th Ave.its NOT ok to contact this poster with services or other commercial interests |
|
air compressor (fairbanks) |
fairbanks |
|
2009-07-16 10:02AM |
|
Coleman Powermate 25 gallon tank 5hp excellent condition.asking 150.00 - obo contact Glenn @ 456-1708 Location: fairbanksits NOT ok to contact this poster with services or other commercial interests |
|
4 way lug wrench - $15 (fairbanks) |
fairbanks |
|
2009-07-16 9:56AM |
|
silver 4 way lug wrench. local sales only Location: fairbanksits NOT ok to contact this poster with services or other commercial interests |
|
Black and Decker - $90 (fairbanks) |
fairbanks |
|
2009-07-16 9:54AM |
|
Lightly Used Black and Decker firestorm set. Cordless set includes Black and Decker hard caring case. Set includes 18 volt drill, circular saw, reciprocating saw, stud finder, batterie charger, and hard case. All you need to get is a $30.00 rechargeable batterie I lost mine. local sales only. Location: fairbanksits NOT ok to contact this poster with services or other commercial interests |
|
Air Compressor 80 Gallon - $575 (Wasilla) (pic)
|
Wasilla |
|
2009-07-16 9:48AM |
|
Porter Cable 80 Gallon Air Compressor. 175 PSI. 7 HP. Very lightly used, in great conditon. Location: Wasillaits NOT ok to contact this poster with services or other commercial interests |
|
Yamaha 3000ise gen set (anchorage) (pic)
|
anchorage |
|
2009-07-16 9:46AM |
|
nice gen set, just doesnt seem to put out the rated power, might be a simple fix, would also be a hell of a motor with electric start in a go cart $500 230-1191 Location: anchorageits NOT ok to contact this poster with services or other commercial interests |
|
DeWalt Radial Arm Saw - $200 (West ANC) (pic)
|
West ANC |
|
2009-07-16 9:23AM |
|
Older DeWalt Radial Arm Saw. Works. Want it Gone! $200 OBO! Serious Inquiries Only Please.Call or e-mail Chris @ 764-3427 8:30am to 8:30pm Location: West ANCits NOT ok to contact this poster with services or other commercial interests |
|
Welder, Lincoln 175 Tig/ Stick - $950 (Anchorage) |
Anchorage |
|
2009-07-16 9:18AM |
|
230 volt, 175 amp, single phase. w/ foot pedal, ground clamp, air cooled torch, roll around base. 950 firm. Location: Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
15.6V Craftsman Cordless Drill, Worklight, Charger, Case - $35 (West Anchorage) (pic)
|
West Anchorage |
|
2009-07-16 9:08AM |
|
15.6V Cordless Drill, Worklight, Charger, and hard case. Everything works fine. Selling for my buddy. He upgraded to a 5 pc. Combo Milwuakee Set.Call or e-mail Chris @ 7674-3427 between 8:30am and 8:30pm Location: West Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
SUPERSUCKER FOR GOLD - $85 (Big Lake) (pic)
|
Big Lake |
|
2009-07-16 9:03AM |
|
A manual suction dredge . Gets behind and under rocks anywhere in a stream up to 3ft. Usually gets more than a pan full. Great for feeding a sluice box set up next to you. 3 bore with a 2\" nozzle. Also there are two crevice tools for $10.00 ea. One is 3/4\" round and also a nozzle with a 3/8\" flat opening. The ladies love it. No more shovel. Save your back and no more blisters from that shovel handle. More efficient and faster than your shovel. Give me a call at 892-8233 Thanks Jerry Location: Big Lakeits NOT ok to contact this poster with services or other commercial interests |
|
cnc plasma table - $10000 (big lake) |
big lake |
|
2009-07-16 7:47AM |
|
plasma cutting machineplasma cammachine,plasma torch,and discscontact 715-8493 Location: big lakeits NOT ok to contact this poster with services or other commercial interests |
|
CRAFTMAN SHOP VAC - $50 (HUFFMAN AND NEW SEWARD HWY) (pic)
|
HUFFMAN AND NEW SEWARD HWY |
|
2009-07-14 12:50PM |
|
I HAVE A CRAFTMAN SHOP VAC FOR SALE. ASKING 50 DOLLARS OBO. ALL PIECES ARE INCLUDED. IN EXCELLENT CONDITION. HAVE PICTURES OF ITEM BELOW THIS ADD. IF YOU HAVE ANY QUESTIONS OR WOULD LIKE TO PURCHASE THIS ITEM PLEASE EMAIL TRISHA AT AKBABYBOO@YAHOO.COM . Location: HUFFMAN AND NEW SEWARD HWYits NOT ok to contact this poster with services or other commercial interests |
|
Honda 1000 Generator - $700 (S Anchorage) |
S Anchorage |
|
2009-07-14 10:00PM |
|
I have new in box a 1000 Honda generator asking 700 need to get the 2000 Honda generator for more info call 240-7145 Location: S Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
Delta Pro Limited Tool Box - $200 (South Anchorage) (pic)
|
South Anchorage |
|
2009-07-14 9:11PM |
|
Unique Rounded Lid Design Self-Adusting Gear-Lock Dual Rotary Locking System and Self-Aligning Latch Pins Help Maintain a Tight-Fitting Lid 3-Layer RSL Lid High-Strength Body Design Heavy-Duty Gas Spring Guards Built in Storage on Both Ends Call 632-2057 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
400 amp Miller welder/Generator - $2500 (Anchorage) (pic)
|
Anchorage |
|
2009-07-14 9:02PM |
|
50Ft Stinger, Mounted on a trailer can be sold with or without the trailer. Gas powered Manual includedCall bob @333-5739 between 4pm - 10pm M-F all day Sat and Sun Location: Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
Construction tools (all kinds) (Anchorage) |
Anchorage |
|
2009-07-14 8:44PM |
|
Binks airless sprayer with Graco Gun 500.00Snow plow for Skid steer loader 300.00Bakers rolling Scaffold 250.00Scaffold 2-sections with rolling wheels 200.00Material rolling flat cart 75.00Large new gang box 250.0015 gallon plastic fuel drums 15.00 eachFiberglass Ladders (all sizes)Scaffold planks / working planksTimberwolf angle drill and bits 125.00Makita 14” chop saw 75.00Utility carts 75.0010” Makita chop saw 75.00Rubbermaid trash cansBrooms, rakes, shovelsCall 345-4305 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
heavy equipment (Peters Creek) |
Peters Creek |
|
2009-07-14 8:41PM |
|
John Deere 450C dozergood condition, well maintained. with detachable back hoe unit. $18,000.00 or best offer.John Deere Front End Loader, 450C on tracks, new arm pins. $10,000.00 or best offer.Blue Metal roofing sheets, best offer.some new, some used but in great condition Location: Peters Creekits NOT ok to contact this poster with services or other commercial interests |
|
Chainsaw - $250 (S. anc) (pic)
|
S. anc |
|
2009-07-14 8:35PM |
|
039 Stihl chainsaw in good condition. Runs good907-360-7660 Location: S. ancits NOT ok to contact this poster with services or other commercial interests |
|
Cement Mixer - $250 (Chugiak) (pic)
|
Chugiak |
|
2009-07-14 8:35PM |
|
Has tires and tow hitch! nstahly@hotmail.com Location: Chugiakits NOT ok to contact this poster with services or other commercial interests |
|
Craftsman table saw - $250 (jewel lake) |
jewel lake |
|
2009-07-14 8:28PM |
|
Sears craftsman 10\" table saw. Good condition.You are more then welcome to come see it, there is always someone here.334-9590 Mary or Nate Location: jewel lakeits NOT ok to contact this poster with services or other commercial interests |
|
DeWalt laser level 18V w/tripod - $700 (Big Lake) |
Big Lake |
|
2009-07-14 8:19PM |
|
Laser level works great. I have biult many foundations with it. Getting out of contractor business so I do not need.1100 New at AIH. Asking 700.00 OBOPlease call Kristian @ 841-5345 Location: Big Lakeits NOT ok to contact this poster with services or other commercial interests |
|
Craig Taylor 150,000btu diesel heater - $200 (Big Lake) (pic)
|
Big Lake |
|
2009-07-14 8:15PM |
|
Great torpedo heater. Diesel generated worked well for me the last few years.Do not need anymore as I am biulding a shop.Please call Kristian @ 841-5345 Location: Big Lakeits NOT ok to contact this poster with services or other commercial interests |
|
Matco rollaway tool box $3,500.00 OBO - $3500 (Anchorage) (pic)
|
Anchorage |
|
2009-07-14 8:03PM |
|
Matco tool box 49 -Inches tall X 64 -Inches wide X 26- inches Deep $3,500.00 OBO Call 441-2823 ask for Nate, if no answer leave message Location: Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
Large gang box (new) - $200 (Anchorage) |
Anchorage |
|
2009-07-14 7:58PM |
|
Large construction gang box - NewMany other construction items also... Location: Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
Binks Airless Paint sprayer - $500 (Anchorage) |
Anchorage |
|
2009-07-14 7:57PM |
|
Binks airless paint sprayer with Graco gun (extra tips) Excellent condition - lots of extras very low use Location: Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
CARPENTRY TOOLS - $65 (Fireweed & C st.) (pic)
|
Fireweed & C st. |
|
2009-07-14 7:48PM |
|
Carpentry slightly used tools they were used only for a few months after been purchased.if interested call 440-0176cash and sales in town only. thank you Location: Fireweed & C st.its NOT ok to contact this poster with services or other commercial interests |
|
Sheetrock.Panel Lift - $550 (Willow /Valley) |
Willow /Valley |
|
2009-07-14 7:34PM |
|
Drywall lift, with 18 in. extension. Excellent working condition. Can lift to 11ft. plus extension. Heavy duty. Lift 8 ft. or 12Ft Board. For more information, and or to see please call 907 354 1538 or 907 495 1555. OBO. Asking $550 Location: Willow /Valleyits NOT ok to contact this poster with services or other commercial interests |
|
pedastal sump pump (Fairbanks) (pic)
|
Fairbanks |
|
2009-07-14 7:15PM |
|
This is a 115 volt 5.7 amp pump that delivers 2800 G.P.M at a 5 ft heigth. This pump runs like new because it is new, never taken out of the box till now. It still works of course and I`m only asking $40.00 for it. You can reach me at 529-5065. Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests |
|
lights - $15 (Fairbanks) (pic)
|
Fairbanks |
|
2009-07-14 6:52PM |
|
Here`s a halogen light fixture that will take up to a 500 watt bulb which is what`s in it right now, both lamps. I`ll take 15.00 on it O.B.O. It works good lights up no shorts as you can see it sits no higher than 12\". Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests |
|
ladders 2 -20 foot ext, 8 ft step fiberglass - $60 (north east anchorage) (pic)
|
north east anchorage |
|
2009-07-14 6:49PM |
|
$70---$80 for 20 ft extensions $60 for 8 ft step all in exelent condition Location: north east anchorageits NOT ok to contact this poster with services or other commercial interests |
|
Emglo Air Compresser - $200 (Anchorage) |
Anchorage |
|
2009-07-14 5:55PM |
|
30 gallon tank an 3 hp electric moter ,,,i payed 1300 dollars ..... it is in good condition call 360-9044 or 868-2548 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
Purox Cutting/Welding Torch - $8 (Fairbanks--University West) |
Fairbanks--University West |
|
2009-07-14 5:38PM |
|
This is the torch with 2 welding tips and a cutting attachment--it is smaller than some I have used. I have never used this torch, so no nothing about it. Location: Fairbanks--University Westits NOT ok to contact this poster with services or other commercial interests |
|
Antique Die Set - $20 (Fairbanks-University West) |
Fairbanks-University West |
|
2009-07-14 5:38PM |
|
This is an old set of 9 dies and 2 die holders in a wooden box made for them; weight is about 10 lbs. Location: Fairbanks-University Westits NOT ok to contact this poster with services or other commercial interests |
|
FLOOR JACK 3.5 TON - $50 (ANCH) (pic)
|
ANCH |
|
2009-07-14 5:06PM |
|
ALLIED FLOOR JACK 3.5 TON WORKS FINE $50.00 349-4422 Location: ANCHits NOT ok to contact this poster with services or other commercial interests |
|
Gas Compressor - $350 (Anchorage) (pic)
|
Anchorage |
|
2009-07-14 4:59PM |
|
Emglo Gas Compressor - runs great Location: Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
Used Scaffold (Anchorage) (pic)
|
Anchorage |
|
2009-07-14 4:36PM |
|
Used Scaffold for sale. Huge Inventory. Heavy duty. Can ship to the bush. Priced by the piece. Very affordable. Jack Screws, Casters, Plank, Side Brackets, Shoring Scaffold. Swivel Clamps, Right Angle Clamps and Tubes. Putlogs. Possible business opportunity. Interesting Trades Considered Please Call 242-3971 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
Manchester Power Jet Propane Torch - $60 (South Anchorage) (pic)
|
South Anchorage |
|
2009-07-14 4:35PM |
|
Heres a link with info ( http://www.thepropaneshop.com/onlinestore/detail.cfm?ID=8061S&storeid=1 ) $60. Call 243-0480 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
J Controls Valve reconditioning tool - $1 (Apex, NC) (pic)
|
Apex, NC |
|
2009-07-14 4:31PM |
|
Johnson Controls Valve Reseating Kit (PNEUMATIC VALVE HVAC) Being offered is a PRISTINE, unused , NOS, Johnson Controls Valve Reseating Kit. These were discontinued many years ago, but this one surfaced from the basement of a retired school custodian. When I spoke to Johnson Controls, the last one they sold was VERY pricey. If you are maintaining a Pneumatically controlled building, you NEED this tool. Call if you are interested. Sheldon 919-270-9271 valve Reseating Kit (PNEUMATIC VALVE HVAC) Location: Apex, NCits NOT ok to contact this poster with services or other commercial interests |
|
28" Tracked Snow Blower - $500 (Anchorage) (pic)
|
Anchorage |
|
2009-07-14 2:54PM |
|
Bought new in spring of 06, used maybe 7 - 8 times.9 hp, 28 in wide, 6 forward - 2 reverse speeds, \"power\" steering, tracks, electric start, headlight.Yard MachineGreat shapeAlways stored indoors$500.00 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
NEW paintball gun-ION - $350 (Soldotna) (pic)
|
Soldotna |
|
2009-07-14 2:16PM |
|
brand new paintball gun, bought it thought it would be fun. Didnt like getting shot as much as shooting others...so now its for sale..been used twice, maybe 250 rounds through the barrel, air tank filled once. comes with auto hopper, 3000 psi tank, gun, box w/ tools.full or semi-auto functions up to 21 rds a second.trevor907-252-8988 leave a message if i dont answer please, or reply to garbled email address on here. Location: Soldotnaits NOT ok to contact this poster with services or other commercial interests |
|
$$$$$ Oxygen & Acetylene $$$$$ - $190 (Anchorage) |
Anchorage |
|
2009-07-14 1:47PM |
|
Call 317-1827 or go pay $500+ Location: Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
CIRCULAR SAW: Black and Decker / Skill saw - $35 (Anchorage: Spenard) (pic)
|
Anchorage |
|
2009-07-14 1:44PM |
|
Black and Decker Circular Saw in excellent working condtion. Comes with ripping blade. Not one of the lighter cheap models. Convenient location. Location: Anchorage: Spenardits NOT ok to contact this poster with services or other commercial interests |
|
McCulloch Pro Mac 55 chainsaw - $20 (Eagle River) (pic)
|
Eagle River |
|
2009-07-14 1:36PM |
|
Old chainsaw (approx 1975 vintage). Last used 10 years ago. Ran when last used but I have not tried to start it. None of the new safety equipment. (no chain-brake or anti kick features). Cleaning garage and would like to see it go. $20. Local calls only at 694-3186. Location: Eagle Riverits NOT ok to contact this poster with services or other commercial interests |
|
Electric chainsaw - $15 (Eagle River) (pic)
|
Eagle River |
|
2009-07-14 1:34PM |
|
McCulloch EM 300S electric chainsaw 3.0 HP. Used. Works. $15. Phone calls only. 694-3186. Location: Eagle Riverits NOT ok to contact this poster with services or other commercial interests |
|
21' Aluminum ext ladder - $100 (anchorage) |
anchorage |
|
2009-07-14 1:20PM |
|
We no longer need our 21 type 2 grade commercial extension ladder. In great condition. Pictures soon. Email for more details. Location: anchorageits NOT ok to contact this poster with services or other commercial interests |
|
12.5 KW generator - $5000 (valley) |
valley |
|
2009-07-14 11:59AM |
|
12.5 KW onan 4cylinder diesel on its own trailer newly rebuilt on both sides only 5 or so hours on an 8,000 dollar rebuild great deal if u need some portable power any ? call 841-9669 days or 892-8724 eves after6 Location: valleyits NOT ok to contact this poster with services or other commercial interests |
|
ROOFERS/ Aluminum Garlock Feltlayer - $350 (South Anchorage) (pic)
|
South Anchorage |
|
2009-07-14 11:59AM |
|
Call Mel or Colleen 632-5759 or 349-5051 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
ELECTRICIANS 50' of core flow - $45 (South Anchorage) (pic)
|
South Anchorage |
|
2009-07-14 11:50AM |
|
Call Colleen or Mel at 349-5051 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
Snap-On Triple bank tool box MUST GO!! Consider 1/2 trade!!! - $7000 (Anchorage) (pic)
|
Anchorage |
|
2009-07-14 11:05AM |
|
This is a BIG boxSnap-On tool box for sale with cabinets and stainless top!!!! Motivated to sale!!Retail was $12,000.00Model # KRL7003APCM Color: Royal Blue Snap-On said to sell it for $8500 but now I need the room so it needs to go!!!! Will consider 1/2 trade and 1/2 cash!!!!!$7000.00 279-4444 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
Fuel Tank 500 Gallons - $575 (Cooper Landing) |
Cooper Landing |
|
2009-07-14 10:51AM |
|
500 gallon fuel tank with stand. Please call (907) 595-1840 or 351-7508. Location: Cooper Landingits NOT ok to contact this poster with services or other commercial interests |
|
Lincoln Welders - 1 Arc & 1 Stick (Wasilla) (pic)
|
Wasilla |
|
2009-07-14 10:51AM |
|
I have two welders avaialable1 Lincoln SP200 Arc Welder - comes with bottle and gages1 Lincoln stick welderCall Danny at Gueco Racing (907)841-2345 Location: Wasillaits NOT ok to contact this poster with services or other commercial interests |
|
10kw generator - $4500 (Big Lake) (pic)
|
Big Lake |
|
2009-07-14 10:23AM |
|
10kw Generac Generator for sale. Runs well and only has 900 hrs on it. Used to be owned by MTA. Serious inquiries call Jake 382-4351 Location: Big Lakeits NOT ok to contact this poster with services or other commercial interests |
|
Grove Rubber tire crane - $225000 (palmer) |
palmer |
|
2009-07-14 9:58AM |
|
Yard crane . call 907-227-4063. email for pics Location: palmerits NOT ok to contact this poster with services or other commercial interests |
|
PORTABLE FISH TAPE BLOWER - $350 (WASILLA) (pic)
|
WASILLA |
|
2009-07-14 9:49AM |
|
A vacuum Fish tape needs to be set up at both ends. Who needs that! By nature Vaccums really SUCK!This Portable system can be set up at one end. Much handier. Thar she blows!This little mouser system also comes with 4 brand new mice as well as baloon type mousesWorks great.Phone 907-841-6781 Location: WASILLAits NOT ok to contact this poster with services or other commercial interests |
|
Makita Finishing Sander - $15 (South Anchorage) (pic)
|
South Anchorage |
|
2009-07-14 9:15AM |
|
This Makita finishing sander is used but in good working condition. It is a model BO4550 and features include: 1.6 amp motor at 14,000 OPM for smooth finish, only 2.1 lbs, Dust Bag, durable all ball bearing construction, sands flush on three sides. Call at 346-2249. Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
edge bander/ cabinet shop tool - $4000 (chugiak) (pic)
|
chugiak |
|
2009-07-14 8:49AM |
|
scmi model k201 in good condition. 230 volt 3 phase, max thickness 1.5 inches, 3 mm trim . fast heat glue pot, have some banding and other extras that go too. the sound enclosure was off and a pallet of wood fell over on it, it needs straightened out and new lexan put in to be good as new. this has been done. call 688-3998 check out the prices these are going for down south @ www.machineking.com Location: chugiakits NOT ok to contact this poster with services or other commercial interests |
|
southbend 9 inch metal lathe - $1200 (chugiak) (pic)
|
chugiak |
|
2009-07-14 8:39AM |
|
clean little lathe. 9x36\", 3 and 4 jaw chucks, turret tool post, 3c collet closer, 120 volt motor, on sb stand. this is a change gear lathe. we take visa/mc. call 688-3998 Location: chugiakits NOT ok to contact this poster with services or other commercial interests |
|
Reciprocating Saw |
|
|
2009-07-14 8:37AM |
|
Porter Cable Tiger Reciprocating Saw w/ case; Model 737; has only had light use; dual cutting action; quick change blade clamp. $70its NOT ok to contact this poster with services or other commercial interests |
|
Craftsman Router - $50 (Downtown) |
Downtown |
|
2009-07-14 8:02AM |
|
In good condition - rarely usedMarie: 272 6537 Location: Downtownits NOT ok to contact this poster with services or other commercial interests |
|
Worm Drive Skil Saw - $180 (Downtown) |
Downtown |
|
2009-07-14 7:56AM |
|
In good condition- hardly usedMarie: 272 6537 Location: Downtownits NOT ok to contact this poster with services or other commercial interests |
|
De Walt Chop Saw - $300 (Downtown) |
Downtown |
|
2009-07-14 7:48AM |
|
Good condition- hardly usedMarie 272 6537 Location: Downtownits NOT ok to contact this poster with services or other commercial interests |
|
Delta Table Saw - $100 (Downtown) |
Downtown |
|
2009-07-14 7:44AM |
|
Good condition. Hardly used Marie : 272 6537 Location: Downtownits NOT ok to contact this poster with services or other commercial interests |
|
surveyors Lieca levels, aluminum tripod and fiberglass rod |
|
|
2009-07-14 7:14AM |
|
Two Leica scopes na20 and na720, one aluminum tripod and a flat rod that you can mount a reciever on call 344-8632 and leave a message im either working or asleep so ill return your call when I get in thanksits NOT ok to contact this poster with services or other commercial interests |
|
Thermal Arc Welder - $1350 (North Pole) |
North Pole |
|
2009-07-14 6:07AM |
|
Thermadyne 250 GTS Welder.230 volt,single phase,Stick,High freguency TIG,and Lift start.Liight weight machine.Comes ready to go with stinger,ground and 100 foot of 230 volt power cord.Respond for photo Location: North Poleits NOT ok to contact this poster with services or other commercial interests |
|
KOBALT 6o Gallon Compressor - $375 (Abbot old seward) (pic)
|
Abbot old seward |
|
2009-07-14 1:02AM |
|
Like ne condition used 3 times and stored in storage since then.. bought new last year at lowes.KOBALT 60 Gallon Upright Air Compressor Shipment Details: 60 Gallon High Output Upright Air Compressor Single stage.14.0 CFM at 90... 744-0202 Location: Abbot old sewardits NOT ok to contact this poster with services or other commercial interests |
|
12,000 LB Flat Bed Trailer - $6500 (Wasilla) |
Wasilla |
|
2009-07-13 9:09AM |
|
http://anchorage.craigslist.org/grd/1263096628.htmlClick on link to see Location: Wasillaits NOT ok to contact this poster with services or other commercial interests |
|
Trailer Ball Mount - $10 (Peters Creek) (pic)
|
Peters Creek |
|
2009-07-13 8:56AM |
|
NEW Never UsedValley 7510 Ball Mount Load 5000 LB Toung 500 LBTrailer ball mount with 1\" ball hole 1\" rise 8\" length 2-1/4\" drop and 6000 lb. rating. more Location: Peters Creekits NOT ok to contact this poster with services or other commercial interests |
|
24 inch Bolt Cutters - $15 (Peters Creek) (pic)
|
Peters Creek |
|
2009-07-13 8:43AM |
|
24 inch Bolt CuttersOnly used twice, Still very new ! Location: Peters Creekits NOT ok to contact this poster with services or other commercial interests |
|
Construction compressor - $50 (Wasilla or Anchorage) |
Wasilla or Anchorage |
|
2009-07-13 8:23AM |
|
I bought one of the combo sets and do not need this any longer. 242-5596 Location: Wasilla or Anchorageits NOT ok to contact this poster with services or other commercial interests |
|
wanted Tig welder AC - $1 (fairbanks) |
fairbanks |
|
2009-07-13 5:50AM |
|
Wanted Tig welder AC older is better as I dont have lots of money. Location: fairbanksits NOT ok to contact this poster with services or other commercial interests |
|
Tool box with tools - $1000 (Anch) |
Anch |
|
2009-07-01 12:21PM |
|
I have a tool box FULL of tool nuthing brand new or not all name brand but still lots to bold off of. There is 1/2inch. 3/8 & 1/4inch. Sawall drill some air tools and more. I dont have room to keep it no more and wood like to see it go soon. I know its not the best looking box but it works just fine and with the tools it comes with makes it a gray set for the do it your selfer and save ya some cash getting all it comes with. Im asking $1,000. O.B.O. And opin for bardering on part or all. Atv jeep stuff maybe gold mineing things I dont know what you got. I can send more pics. If asked but if intrested it MIT just be e-z-er to come look at it. I cant post a pic. Off my phone but can email one. Sorry just figerd that out. So email or call Mike at 744-0216Thinks Location: Anchits NOT ok to contact this poster with services or other commercial interests |
|
Concrete power trowel - $1400 (fairbanks) (pic)
|
fairbanks |
|
2009-07-01 3:05PM |
|
3 8 horse power trowel about three years old. runs like a top Location: fairbanksits NOT ok to contact this poster with services or other commercial interests |
|
Delta Drill Press - $130 (anch) (pic)
|
anch |
|
2009-07-01 2:12PM |
|
This Drill Press is1/3 hp, 1720 rpm and with a 12\" work bench.Pls dont, call 907-229-2053 or 240-9306 Location: anchits NOT ok to contact this poster with services or other commercial interests |
|
Makita 3500 gen / eco-throttle perfect for contractor/camping/cabin - $200 (Eagle River) (pic)
|
Eagle River |
|
2009-07-01 2:12PM |
|
makita generator 3500 with replacement value of over $1,000 for sale only 200.00 call 764-9745 Location: Eagle Riverits NOT ok to contact this poster with services or other commercial interests |
|
Irwin 76 pc Kirt Bush Signature Series Tap and Die set - $150 (Sterling) (pic)
|
Sterling |
|
2009-07-01 1:35PM |
|
Irwin 76 pc Kirt Bush Signature Series Tap and Die set. Use once. In excellant condition. All pieces there. Metric and standard. Paid $325. $150 firm. 907-262-6658 907-252-4806 Location: Sterlingits NOT ok to contact this poster with services or other commercial interests |
|
Miller Spoolmate 3035 Spoolgun - $450 (Wasilla) (pic)
|
Wasilla |
|
2009-07-01 1:30PM |
|
Miller Spoolmate 3035 Spoolgun for aluminum welding. New - never used. Direct hook-up for Millermatic 210 / 212 welders. Can be used with other welders with the Miller SGA 100 Spoolgun Control (not included with gun). Call Steve @ 351-9055. Location: Wasillaits NOT ok to contact this poster with services or other commercial interests |
|
Ridgid Air Compressor - $500 (Fairbanks/North Pole) (pic)
|
Fairbanks/North Pole |
|
2009-07-01 1:22PM |
|
This is a like new air compressor that I need to sell. It has only been used for one season and runs perfectly. Always starts easy and builds pressure quickly. If interested, call me at 347-8325. Location: Fairbanks/North Poleits NOT ok to contact this poster with services or other commercial interests |
|
Composter -Rubbermaid - $50 (Juneau) |
Juneau |
|
2009-07-01 1:10PM |
|
Rubbermaid Composter North Douglas Location: Juneauits NOT ok to contact this poster with services or other commercial interests |
|
5 ea routers and bits - $320 (Eagle River) |
Eagle River |
|
2009-07-01 11:46AM |
|
5 routers, 3 bases and many bits. All work great. 4 are porter cable 1 hitachi. Bits alone are worth more than $320 which you can verify by visiting anywhere routers and bits are sold. $320 for all. 694-0629 Location: Eagle Riverits NOT ok to contact this poster with services or other commercial interests |
|
edge planer/joiner - $120 (Eagle River) |
Eagle River |
|
2009-07-01 11:46AM |
|
Porter Cable edge planer/joiner with extra brand new bit, works great. $120 obo 694-0529 Location: Eagle Riverits NOT ok to contact this poster with services or other commercial interests |
|
14" Makita chopsaw - $100 (Eagle River) (pic)
|
Eagle River |
|
2009-07-01 11:46AM |
|
14\" Makita Chopsaw with 110 tooth resharpable carbide tipped blade, very powerful If you know your buiness you recognize the blade alone is worh a pretty penny. $100 694-0529 Location: Eagle Riverits NOT ok to contact this poster with services or other commercial interests |
|
next
100 Listings >
|
|
|
|
Search
Create Post
Goto Image view