Werner 12 folding ladder - $125Werner Articulated folding ladder. 6 step ladder, 12 straight ladder.18 different positions, can be used as base for scaffolding for work bench.In great shape!!Asking $125 obo Please call 907-474-0313, Fairbanks Area Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Lincoln AC-225 Arc Welder w/ Accessories - $225Lincoln AC-225 Arc Welder w/ Accessories This is an AC ONLY welderPractically new, includes 2 hoods, a pair of gloves, two full and one partial box of electrodes, chipping hammer, 240 volt cord for different plug in and a wheeled cart to move it around on. Used less that 2 hours. Around $310 at Lowes without extras. Asking $225.00 cash only please call 907-474-0313, Fairbanks Area Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Tool Boxes for sale - $650A set of Huskey tool boxes in great shape, The red stacked pair for $400The black box for $300Take all of them for $650Some tools for sale also, sold separately.Asking $650 cash only - 907-474-0313 - Fairbanks Area Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

This is a 115 volt 5.7 amp pump that delivers 2800 G.P.M at a 5 ft heigth. This pump runs like new because it is new, never taken out of the box till now. It still works of course and I`m only asking $40.00 for it. You can reach me at 529-5065. Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Here`s a halogen light fixture that will take up to a 500 watt bulb which is what`s in it right now, both lamps. I`ll take 15.00 on it O.B.O. It works good lights up no shorts as you can see it sits no higher than 12\". Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

3 8 horse power trowel about three years old. runs like a top Location: fairbanksits NOT ok to contact this poster with services or other commercial interests

This is a like new air compressor that I need to sell. It has only been used for one season and runs perfectly. Always starts easy and builds pressure quickly. If interested, call me at 347-8325. Location: Fairbanks/North Poleits NOT ok to contact this poster with services or other commercial interests

new chain saw with case. Location: fairbanksits NOT ok to contact this poster with services or other commercial interests

Miller ARC Welder for sale, $300 OBO. This thing is OLD school and works great. Plug type selection for 30-220A using 2 different sides (hi / lo). Comes with ~15 of ground cable and ~30 of extendable hot lead. Ground clamp & electrode holder are in good shape, never had any problems. Also comes with cart; 2 swivel casters, 2 straight. There are no welding gas tanks available as this is an AC ARC welder.Runs off 220V 50A circuit.This posting will be removed when item is SOLD. It will be updated if sale is pending, email with any other pertinent questions; additional pictures are available upon request. Bill Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Craftsman 10\" Stationary Table Saw..excellent condition with manual, ripping guide and miter guide. Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Spanco Fixed Height Steel Gantry CraneCrane: 2 ton, 14 ft wide by 14ft highHoist: Made in USA, Harrington, 2 ton, 16th fallVery slow!Asking $4000 OBOWould consider selling separate Hoist and Crane...Crane: $1800Hoist: $2500 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Big cutting torch setgauges, cutting head, welding head, striker, and hose.No bottles.Asking $300 OBOCall Terry at 907-457-2625 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Snap-On Air Drill, ReversibleNew condition, 1/2\" chuck, in the box$250 FirmCall Terry at 907-457-2625 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Snap-On puller setalmost everything on the board in the back of the Snap-On truck, plus extras!$750 FirmCall Terry at 907-457-2625 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Lincoln 250 Ideal ARC AC-DC Welder with 50 leads and Air ARC whip.Box of 7018 and 2 boxes of air arc rod. Have wove lead and couplers and ends. Over $1200 worth of just the lead cables!For eveything: Asking $1300 OBOCall Terry at 907-457-2625 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Snap-on Battery & Charging System Tester - New condition!!!New $900.00Asking $500 OBOCall Terry at 907-457-2625 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

24\" Rockford Shaper with 14\" vise. Excellent Condition.George 460-9473 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Monarch 24\" swing 78\" between centers with pattern tracer Lots of tooling. Nice machine!George 460-9473 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

20 Car hauler enclosed trailer. Set up for general contractor. Great shape $7250. ****Also have 24 Drive in drive out snowmachine trailer.Great shape tows easily $7500 Location: Fairbanks AK 99709its NOT ok to contact this poster with services or other commercial interests

Full size Rockwell 10\" Contractors Table Saw on rolling coasters. Its in good condition and it works very well. I hate to part with it, but my wife says it needs to get out of my basement. $300 OBO. 978-6753 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

VERY NICE MANUAL MITER WITH TWO SAWS. THIS TOOL IS IN EXCELLENT CONDITON, BUT WERE MOVING. SEE US ASAP. Location: FAIRBANKSits NOT ok to contact this poster with services or other commercial interests

Snap - on Toolbox for sale Harley Davidson Ed. Paid 11,000.00 for it selling for $4,000 GREAT DEAL!Contact: longleyclan@gci.net Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Brand new pipe wrench. Must sell. Price firm. Retails for $169. Location: Fairbanks, AKits NOT ok to contact this poster with services or other commercial interests

Brand new Kraft magnesium float blade, brush and six 4 extension handles. Price firm.Retails for $330 Location: Fairbanks, AKits NOT ok to contact this poster with services or other commercial interests

Brand new . Never used cut-off machine w/ 7 wheels. One masonry wheel, one metal wheel and 5 general purpose wheels. Seriously heavy duty. Must sell. Price firm.Machine retails for over $500. Location: Fairbanks, AKits NOT ok to contact this poster with services or other commercial interests

Brand new rebar bender/cutter. Designed for contractor who needs a tool capable of on-the-job rebar cutting and bending. Easily mounted on most flat surfaces, enhancing leverage and increasing security. Shears the bar and bends rebar to 90 degrees or 180 degrees. 5/8`` maximum security. Length 52\" weight 45lbs.Must sell. Price firm.Retail price $369 Location: Fairbanks, AKits NOT ok to contact this poster with services or other commercial interests

Brand new rigid pipe threader. Must sell . Price firm. Retails for over $2600. Location: Fairbanks, AKits NOT ok to contact this poster with services or other commercial interests

Brand new pipe threader with kit. Includes oiler container (not shown) and everything else in photo. Must sell. Price firm. Location: Fairbanks, AKits NOT ok to contact this poster with services or other commercial interests

Bought it new. Very low hours. Less than a half cord cut with new chain. Looks fine, runs fine. Found new at 349.95. Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

New New. New from Home Depot For almost $600.00! It has the 10 HP briggs strat motor. Runs like new. Asking $350.00Thanks for looking590-2912 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Fiberglass handle for easier swinging. Call 322-9667 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Call 322-9667 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Barely used and in new condition (12000 lb rated capacity).322-9667 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Pipe Vise Tripod, No. 450 made by RIGID. This tripod lets you easily manipulate heavy pipe for plumbing or gas purposes, or even for theatrical lighting mounting rails. Integral legs and tray fold in for easy carrying and setup. Large vise base overhangs front legs for clear tool swing. Complete with slots for hanging tools, pipe rest, three pipe benders, and ceiling screw. $200. Email if interested-must sell-viewing Fridays and Saturdays only. Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Older Hot Shot Heater in working condition. $45 or best offer. Call 322-4144 Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Wanger Paint Sprayer, used once, works great. Prefect for Staining decks, small projects. Has carrying caseAsking $30.00Call Patrick 452-6254 for info Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Dust collecter, with flex pick up hose488-0603 Location: Fairbanks North Poleits NOT ok to contact this poster with services or other commercial interests

Delta air filter get new filters from AIH488-0603 Location: Fairbanks North Poleits NOT ok to contact this poster with services or other commercial interests

Bought it new. Very low hours. Less than a half cord cut with new chain. Looks fine, runs fine. Found new at 349.95. Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Craftsman 10\" Contractor Series 3HP table saw with rollers. Excellent condition, little used. Has some rust on cast table from morning dew on construction site. Nice saw, with clean accurate cuts. Just too big for site work.Call 388-4726. Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Miller ARC Welder for sale, $300 OBO. This thing is OLD school and works great. Plug type selection for 30-220A using 2 different sides (hi / lo). Comes with ~15 of ground cable and ~30 of extendable hot lead. Ground clamp & electrode holder are in good shape, never had any problems. Also comes with cart; 2 swivel casters, 2 straight. There are no welding gas tanks available as this is an AC ARC welder.Runs off 220V 50A circuit.This posting will be removed when item is SOLD. It will be updated if sale is pending, email with any other pertinent questions; additional pictures are available upon request. Bill Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Nice air compressor huge tank runs great. right now it is hooked into my system. Location: fairbanksits NOT ok to contact this poster with services or other commercial interests

This is a nice unit the model is cbe6. It can cut and bend #4 or #5 rebar very quick. low hours. very good shape. Location: fairbanksits NOT ok to contact this poster with services or other commercial interests

Late Model 9000kw Kohler Gasoline Generator Powered by Liquid Cooled Ford 4 Cylinder MotorGreat for Cabin. Hertz 60, Phase 1, Amps 38 @ 1800 rpm Volts 120/240Model 10CCE, Spec 110476, Kilowatt 9KZA9 PF 1.01644 hrs $3000 Call 907.978.3147 Location: Fairbanks, AK its NOT ok to contact this poster with services or other commercial interests

spoolmate 185 with control box , will fit almost any mig welder, this is a spoolgun for welding aluminum . control box adpts spoolgun to most 110 and 230 volt mig (wire feed) welders ,it is in the light to medium duty range good for repairs or small projects . not heavy enough to builds boats . questions call dave at 907-455-6642 or cell at 907-687-2075 Location: fairbanksits NOT ok to contact this poster with services or other commercial interests

This is a Hiltigun power fastner in case. If interested please email me... This is a great buy! Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

This is a Torrin Engine stand in Excellent shape. Any questions or interested, email me Location: Fairbanksits NOT ok to contact this poster with services or other commercial interests

Custom built heavy duty bobcat trailer. 2 ea. 6000 lb torflex axles with electric brakes 16 wheels expanded metal deck ramps and beaver tail all heavy duty loading winch avaiable for extra. pentle hitch or 2-5/16 ball. 10,000 crank down jack $3500 I put tracks on my bobcat now it wont fit on trailer.call jeff @388-8605 Location: fairbanksits NOT ok to contact this poster with services or other commercial interests

snowblower. engine runs great. needs recoil and a couple handle bolts maybe some other odd n end maintenance. email or call 378-1091 its going to the dump next weekend. Location: north pole/fairbanksits NOT ok to contact this poster with services or other commercial interests

Innershield Weld Pac 100, 110V, 20 A, with cart.456-1696 Location: fairbanksits NOT ok to contact this poster with services or other commercial interests