New paint. 2 buckets with hard surfacing.Very low hours.Comes with spare parts and filters.$65,000 or best offer.For more details,or to arrange showing, please call Brad at (907) 232-3602.1999 EX200 Hitachi - the left side:1999 EX200 Hitachi - A closeup of the bucket:1999 EX200 Hitachi - A closeup of the left side:1999 EX200 Hitachi - A closeup of the tracks:1999 EX200 Hitachi - A closeup of the right side and part of the back:$65,000 or best offer.For more details,or to arrange showing, please call Brad at (907) 232-3602. Location: Big Lakeits NOT ok to contact this poster with services or other commercial interests

The D7 has a fully enclosed cab with good working heater.It was recently repainted, and gone through completely, including fluids, belts, new cutting edge and new exhaust. The machine is in excellent condition, and is ready to go to work! The dozer has a new undercarriage.It has only 5,200 original hours.The dozer has a 202 hp 6 cylinder engine.It has a Hyster D7F winch mounted on the back$49,900 or best offer.[The Specs are listed below the picture.]Delivery options:You could pick it up in Anchorage.Or for an additional $5,000, we could deliver it to Washington state.For more details, please call Brad at (907) 232-3602. Selected DimensionsDimensionsA. Length w/ Blade17.3 ft in5280 mmB. Width Over Tracks8.6 ft in2620 mmC. Height to Top of Cab10.7 ft in3250 mmD. Length of Track on Ground8.9 ft in2700 mmE. Ground Clearance1.1 ft in347 mmF. Length w/o Blade13.7 ft in4190 mmUndercarriageG. Track Gauge6.5 ft in1980 mmH. Standard Shoe Size20 in508 mm Specification Engine MakeCaterpillar Model3306 T Gross Power200 hp149.1 kw Power Measured @2000 rpm Displacement640.7 cu in10.5 L Aspirationturbochaged Number of Cylinders6 Operational Operating Weight44599.5 lb20230 kg Fuel Capacity115 gal435.3 L Transmission Typepowershift Number of Forward Gears3 Number of Reverse Gears3 Max Speed - Forward6.2 mph9.9 km/h Max Speed - Reverse7.4 mph11.9 km/h Undercarriage Ground Pressure10.3 psi71 kPa Ground Contact Area4278 in22.8 m2 Standard Shoe Size20 in508 mm Number of Track Rollers per Side6 Track Gauge6.5 ft in1980 mm Standard Blade Width12 ft in3660 mm Dimensions Length w/o Blade13.7 ft in4190 mm Length w/ Blade17.3 ft in5280 mm Width Over Tracks8.6 ft in2620 mm Height to Top of Cab10.7 ft in3250 mm Length of Track on Ground8.9 ft in2700 mm Ground Clearance1.1 ft in347 mm Location: Big Lakeits NOT ok to contact this poster with services or other commercial interests

New paint. 2 buckets with hard surfacing.Very low hours.Comes with spare parts and filters.$65,000 or best offer.For more details,or to arrange showing, please call Brad at (907) 232-3602.1999 EX200 Hitachi - the left side:1999 EX200 Hitachi - A closeup of the bucket:1999 EX200 Hitachi - A closeup of the left side:1999 EX200 Hitachi - A closeup of the tracks:1999 EX200 Hitachi - A closeup of the right side and part of the back:$65,000 or best offer.For more details,or to arrange showing, please call Brad at (907) 232-3602. Location: Big Lakeits NOT ok to contact this poster with services or other commercial interests

The D7 has a fully enclosed cab with good working heater.It was recently repainted, and gone through completely, including fluids, belts, new cutting edge and new exhaust. The machine is in excellent condition, and is ready to go to work! The dozer has a new undercarriage.It has only 5,200 original hours.The dozer has a 202 hp 6 cylinder engine.It has a Hyster D7F winch mounted on the back$49,900 or best offer.[The Specs are listed below the picture.]Delivery options:You could pick it up in Anchorage.Or for an additional $5,000, we could deliver it to Washington state.For more details, please call Brad at (907) 232-3602. Selected DimensionsDimensionsA. Length w/ Blade17.3 ft in5280 mmB. Width Over Tracks8.6 ft in2620 mmC. Height to Top of Cab10.7 ft in3250 mmD. Length of Track on Ground8.9 ft in2700 mmE. Ground Clearance1.1 ft in347 mmF. Length w/o Blade13.7 ft in4190 mmUndercarriageG. Track Gauge6.5 ft in1980 mmH. Standard Shoe Size20 in508 mm Specification Engine MakeCaterpillar Model3306 T Gross Power200 hp149.1 kw Power Measured @2000 rpm Displacement640.7 cu in10.5 L Aspirationturbochaged Number of Cylinders6 Operational Operating Weight44599.5 lb20230 kg Fuel Capacity115 gal435.3 L Transmission Typepowershift Number of Forward Gears3 Number of Reverse Gears3 Max Speed - Forward6.2 mph9.9 km/h Max Speed - Reverse7.4 mph11.9 km/h Undercarriage Ground Pressure10.3 psi71 kPa Ground Contact Area4278 in22.8 m2 Standard Shoe Size20 in508 mm Number of Track Rollers per Side6 Track Gauge6.5 ft in1980 mm Standard Blade Width12 ft in3660 mm Dimensions Length w/o Blade13.7 ft in4190 mm Length w/ Blade17.3 ft in5280 mm Width Over Tracks8.6 ft in2620 mm Height to Top of Cab10.7 ft in3250 mm Length of Track on Ground8.9 ft in2700 mm Ground Clearance1.1 ft in347 mm Location: Big Lakeits NOT ok to contact this poster with services or other commercial interests

I have a set of forks for a loader the measurements on them are 90inches long 57 inches tall with a 3 3/4 inch shaft. i am willing to let them go for $1000.00 or best offer i just want them gone . if you would like to inquire more about them please call me at 1-907-884-4499 (Ellie) day or night any time or e-mail me and i will get back to you asap thanks for your time Location: Big Lake its NOT ok to contact this poster with services or other commercial interests