1/3 hp variable speed with mount attached Location: S. Anchorageits NOT ok to contact this poster with services or other commercial interests

Snapon ACT 3120 recharge & recycle unit, guages include, 1/3 tank of R12 Location: S. Anchorageits NOT ok to contact this poster with services or other commercial interests

One brand new battery and one used several times. Both batteries have full memory for power, charger included. Drill was stolen and no need for batteries.Will trade for a 22 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

nice gen set, just doesnt seem to put out the rated power, might be a simple fix, would also be a hell of a motor with electric start in a go cart $500 230-1191 Location: anchorageits NOT ok to contact this poster with services or other commercial interests

15.6V Cordless Drill, Worklight, Charger, and hard case. Everything works fine. Selling for my buddy. He upgraded to a 5 pc. Combo Milwuakee Set.Call or e-mail Chris @ 7674-3427 between 8:30am and 8:30pm Location: West Anchorageits NOT ok to contact this poster with services or other commercial interests

Unique Rounded Lid Design Self-Adusting Gear-Lock Dual Rotary Locking System and Self-Aligning Latch Pins Help Maintain a Tight-Fitting Lid 3-Layer RSL Lid High-Strength Body Design Heavy-Duty Gas Spring Guards Built in Storage on Both Ends Call 632-2057 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

50Ft Stinger, Mounted on a trailer can be sold with or without the trailer. Gas powered Manual includedCall bob @333-5739 between 4pm - 10pm M-F all day Sat and Sun Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Matco tool box 49 -Inches tall X 64 -Inches wide X 26- inches Deep $3,500.00 OBO Call 441-2823 ask for Nate, if no answer leave message Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

$70---$80 for 20 ft extensions $60 for 8 ft step all in exelent condition Location: north east anchorageits NOT ok to contact this poster with services or other commercial interests

ALLIED FLOOR JACK 3.5 TON WORKS FINE $50.00 349-4422 Location: ANCHits NOT ok to contact this poster with services or other commercial interests

Emglo Gas Compressor - runs great Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Used Scaffold for sale. Huge Inventory. Heavy duty. Can ship to the bush. Priced by the piece. Very affordable. Jack Screws, Casters, Plank, Side Brackets, Shoring Scaffold. Swivel Clamps, Right Angle Clamps and Tubes. Putlogs. Possible business opportunity. Interesting Trades Considered Please Call 242-3971 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Heres a link with info ( http://www.thepropaneshop.com/onlinestore/detail.cfm?ID=8061S&storeid=1 ) $60. Call 243-0480 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Bought new in spring of 06, used maybe 7 - 8 times.9 hp, 28 in wide, 6 forward - 2 reverse speeds, \"power\" steering, tracks, electric start, headlight.Yard MachineGreat shapeAlways stored indoors$500.00 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Black and Decker Circular Saw in excellent working condtion. Comes with ripping blade. Not one of the lighter cheap models. Convenient location. Location: Anchorage: Spenardits NOT ok to contact this poster with services or other commercial interests

Call Mel or Colleen 632-5759 or 349-5051 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Call Colleen or Mel at 349-5051 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

This is a BIG boxSnap-On tool box for sale with cabinets and stainless top!!!! Motivated to sale!!Retail was $12,000.00Model # KRL7003APCM Color: Royal Blue Snap-On said to sell it for $8500 but now I need the room so it needs to go!!!! Will consider 1/2 trade and 1/2 cash!!!!!$7000.00 279-4444 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

This Makita finishing sander is used but in good working condition. It is a model BO4550 and features include: 1.6 amp motor at 14,000 OPM for smooth finish, only 2.1 lbs, Dust Bag, durable all ball bearing construction, sands flush on three sides. Call at 346-2249. Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

This Drill Press is1/3 hp, 1720 rpm and with a 12\" work bench.Pls dont, call 907-229-2053 or 240-9306 Location: anchits NOT ok to contact this poster with services or other commercial interests

Champion 740A Series IV Grader (1995)Articulated motor grader in exceptional cond. well maintained35,000 lbs7,000 hrs14 moldboard6 Cylinder Cummins Diesel $29,500 Offers consideredContact 830-9647 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Miller Bobcat 225 Engine drive welder p/n 907209 225 Amp AC, 210 Amp DC, 10,500 watts peak power 120/240 VAC, Stick, Mig, Flux Cored, and AC/DC Tig capable, Kohler CH-23 23 hp V-Twin New, with Miller True Blue 3-year warranty. For more information please call Airgas at 907-563-6644 or visit us in Anchorage at 6350 Arctic Blvd on the corner of Arctic and Arctic Spur. Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Craftsman Professional Series 2 Stage 25 Gallon 120v Like New Call 907-727-7541 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

$15 each o.b.o884-3670 Location: anchorageits NOT ok to contact this poster with services or other commercial interests

Security box used for restaurant bar rush!!!includes:1 taser w/ holster1 metal detector wand2 security metal beating wands3 sets of handcuffs1 flashlight3 cans of pepper spray Location: Southside Anchorageits NOT ok to contact this poster with services or other commercial interests

Clark 20 gal. Solvent Tank , Like newCall Mike 229-7945 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Powerbuilt , legs and arm retractable , used onceCall Mike 229-7945 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

little beat up but still work great there a air ratchet, air chizzel, and an air impact wrench call 907-727-7541 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Husky Cement Mixer, great condition. 2.5 cubic feet or 270 pounds maximum batch capacity. 1/2 horse power 110-120 volt electric motor. $225 OBO. Bruce 250-7773. Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Two snap-on boxes. One is a cart with 5 slideouts it is red and has a side try. The other is a full size box with 13 slide out draws and is blue. Mod. # KRA5213DPCM. Asking 2000.00 for both or will split. Call for more info. 1(907) 350-6904 no e-mails Location: wasilla/anchorageits NOT ok to contact this poster with services or other commercial interests

Scaffold, 2\"x12\"x12 with metal end pieces with 8 or less (adjustable) 2x4\" legs $55.00 333-7064 calls only please Location: EAST ANCHORAGEits NOT ok to contact this poster with services or other commercial interests

TABLE SAW HOME BUILT FROM 2 1/2 HP 220 VOLT 12: SKILL SAW. CRUDE BUT EFFECTIVE. ALL THE POWER YOU NEED. $35.00 333-7064 CALLS ONLY PLEASE Location: EAST ANCHORAGEits NOT ok to contact this poster with services or other commercial interests

GENERATOR NATURAL GAS OR GASOLINE POWERED 8 HP BRIGGS & STRATTON 2500 WATTS 110 VOLTS AC 70# NEW $195. 333-7064 CALLS ONLY PLEASE Location: EAST ANCHORAGEits NOT ok to contact this poster with services or other commercial interests

Hunter alignment full hight lift control tower Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Alignment rack air assisting hydraulic lifts for each end Location: S. Anchorageits NOT ok to contact this poster with services or other commercial interests

4 floor jacks, on wheels, up to 3 1/2 ton capacity Location: s. Anchorageits NOT ok to contact this poster with services or other commercial interests

12 Volt electric winch, 3/16” cable, 1500lbs rated straight pull. New in box. Includes cable and wiring. Good condition. 632-5536 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Drill stand for any 3/8-inch electric or cordless drill. Made by Sears. Adjustable for most any drill. Good condition. 632-5536 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Nederman Extractor Kit 500 Fume Extractor***FOR SPOT SUCTION OF SOLDERING FUMES AND GASES******NOT SUITABLE FOR WELDING***This is a compact filtrt solution with a very low sound level. The filter captures the noxious fumes and gases that normally occut when soldering, gluing and working with solvents. The filter is disposable and is easily changed. The arm is over three feet and is easily mounted without tools on to the workbench. It is flexible in all directions. Technical Data:Voltage: 120VPower: 80WSoundlevel: 43 dB(A)Filter Efficiency DOP: 99.97%Weight: 19lbsHeight: 10 inchesDiameter: 10 inchesFor more information please call Airgas @ 907-563-6644 or stop by and visit us at 6350 Arctic Blvd on the corner of Arctic and Arctic Spur. Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Millermatic 212 Wire Feed Welder - Capable of welding both steel & aluminum. Mig or Flux Cored Capable CV, DC, Single Phase 200(208)/230V 30-210 Amp Range Rated Output 160A at 24.5 VDC, 60% Duty Cycle Comes Complete With: 15ft 250 Amp M-25 gun 10ft work cable with clamp Regulator with hose .030/.035 in reversible dual groove drive rolls Extra contact tips Set-up & operation CD Optional spool gun available for purchase. Call for more details. For more information call Airgas @ 563-6644 or visit us in Anchorage at 6350 Arctic Blvd on the corner of Arctic and Arctic Spur. Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Workes great just clearing stuff out to get ready for a move. Call Devin or Laurie at 337-7255 or 208-880-7279 for more info. Location: Hillside - Anchorageits NOT ok to contact this poster with services or other commercial interests

This only has 20 hours on it, and I bought it brand new for just under $3000. Includes all accessories, booklets, etc. Excellent condition. Call Devin or Laurie at 337-7255 or 208-880-7279 for more info. Location: Hillside - Anchorageits NOT ok to contact this poster with services or other commercial interests

BRAND NEW, EXCELLENT CONDITION!11HP CRAFTSMAN GENERATOR 6,000 WATT120/240 WATTS OUTLETSONLY USED 2-3 HOURSASKING $800 OR OBOEMAIL: ALASKAWILDCOUNTRY@HOTMAIL.COMMSG: (866) 758-1598 Location: ANCHORAGEits NOT ok to contact this poster with services or other commercial interests

Lincoln 175 sp wire feed 220 volt, Miller 225 stick welder 220 volt plus stainless rolling cart with lots of accessories.632-1211 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

New rebuilt motor, electric start, new battery. 632-1211 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

ICI Professional Pro Spray Airless Sprayer. Needs rebuild, my maintenance man forgot the first part of his job description, maintenance. He is gone and now its time for this to go. I dont have the energy or the need for a machine like this anymore. Was left sitting with paint in the pump which now needs attention and cleaning. The only piece missing is the tip on the gun. Awesome value for the new landlord or up and coming handyman.Ill give full instruction. Call Paul and come pick it up! I hate to let it sit in the shop and take up space. 360-7831 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

I have two HEAVY DUTY SCREW JACKS for sale. I used them for leveling houses / mobile homes and lifting heavy things. Asking $200.00 O.B.O. MAKE ME AN OFFER, THEY HAVE TO GO. 333-9461 ask for BOB Location: ANCHORAGEits NOT ok to contact this poster with services or other commercial interests

Hand cart, 50 inches tall, pneumatic tires, excellent condition. Great for moving those heavy items. Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Really nice delta drill press. Like new. Rarely used. First come, first served. Call Tim 242-8654 Thanks Location: S. Anch.its NOT ok to contact this poster with services or other commercial interests

Dewalt Table Saw with removeable guard. bought used for $250asking $100.Must go by 6-30-2009907-250-1862 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

2 sawhorses. Free for the taking. Must go by 6-30-2009907-250-1862 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

For Sale: Rotozip Rebel with Zip Mate disc cutting attachment, 1/8\" & 1/4\" collets, Circle Cutter, Five 1/8\" Sabercut bits for wood , Two 3.5 inc masonary cut off disks, Three soft grinding disks, Three hard grinding disks, instruction manuals, carrying case, Depth guide and collet wrench. Some of these pieces are not included when you buy the kit from the store. Get it all in one place. Only $125! Please Email us @ jasonkristenandjodin@gmail.com for more info. Thank you Have a nice day! Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Tall Oil Drain Pan for Car LiftBishman 525I have 3 of them and I think they are new and never used. This ad is for one. You may by all three if you like. 1 for $30, 2 for $60, 3 for $90.Im not sure how expensive they are but Im pretty sure you cant beat $30 each Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

It has only 225 hours, a 25 work height and a 30\" x 6 platform, non marking tires, 500lb capacity, built in 110v charge so it could fit any outlett, beeper horn, hour meter, pot guards and much more.For Sale or lease $500 per month each. I have a total of 4 unit. Pls dont email, call 907-229-2053 Location: Anchits NOT ok to contact this poster with services or other commercial interests

Two (2) aluminum blocks rated at 2500#. $55 each or both for $100. Normally these sell for $125-150 each.Each is a different brand but similar in construction. One is a Sherman & Reilly model XS100B; both are rated at 2500# each.223-3174. Cash only, no checks. Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Metal vintage tool or tackle box with fold out compartments.Solid durable box has withstood the test of time.$20. 223-3174Keywords: tool tools tackle fishing toolbox Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Cable puller, Crescent brand, model #385 pulls 3/8\" to 3/4\". $35Cable cutter, Morse Starrett impact type. $35.Both tools for $60. Cash only, no checks.223-3174. Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Ridgid heavy duty commercial pipe cutter model No. 1-2 (2A) in excellent near new condition. AMERICAN MADECuts pipe from 1/8\"-2\"The RIDGID 1-2 (2-A) Heavy-Duty Pipe Cutter cuts 1/8 inch to 2 inch pipe. • Fast, clean pipe cutting by hand or power • Extra-long shank protects adjustment threads • Extra-large handle is provided for quick, easy adjustment • Can be converted to 3-wheel cutter by replacing rollers with cutter wheel$150 new at AIH. $75 cash, no checks. 223-3174 Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

Rubbermaid Plastic Shed. Approx 3ft x 4ft x 6ft asking $65Must go by 6-30-2009907-250-1862 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Ridgid 24\" pipe wrench. Two available at $35 each or both wrenches for $60. AMERICAN MADE.Wrenches are in very good condition.$68 each new. $35 each cash only, no checks. If you are interested in either or both of these, please email me with a local contact number and I will contact you soon. I check my email frequently. Thank you.Keywords: plumbing plumbers pipefitter pipefitters pipefitting plumber pipes Location: South Anchorage/Dimondits NOT ok to contact this poster with services or other commercial interests

1 hand tool box (red) with misc tools inside, I cant get one top latch to close - may just be me $30 If interested, please call 223-6426 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Bergeon automatic oil cup set with agate oil well, five oilers; red, blue, green, yellow, and white and pithblock. When the oiler is removed the lid of the oil cup raises automatically. When putting back the oiler, the lid closes itself. If interested please call 440-7675. This set is worth $302.00 and in new condition. Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Horotec Ball Bearing, Stainless Steel, Screwdriver Set. Have stainless steel bodies with non-rolling anodized aluminum ball-bearing heads. Includes 12 screwdrivers from .50 to 3.00mm, 2ea. spare blades from .50-1.6mm & 1ea. from 2.00-3.00mm. Made in Switzerland. If interested please call 440-7675. Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

This is an L&R dryer used for drying clock movements after cleaning them, but I suppose it could be used to dry other things as well. It is in excellent shape save for a little dirtyness which can be cleaned up easily enough. It has a $300.00 value. If interested please call 440-7675. Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

500 lb. Hydroulic Lift Table , 17in. X 28in.Call Mike 229-7945 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Snap-on 12 volt starting and charging system tester, includes rolling cart, and a Centrey 40 amp charger with 200amp engine startCall Mike 229-7945 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

Clark 20 gal. parts washer Call Mike 229-7945 Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

VICTOR JOURNEYMAN TORCH SET, FULL SIZE BOTTLES, FROM AIRGAS, 200FT OF HOSE.. BEST OFFER CALL 764-3304 Location: ANCHORAGEits NOT ok to contact this poster with services or other commercial interests

!4\" rockwell bandsaw. Its a classic and still has lots of years of use left in it. Rolling enclosed base. Call Tim 242-8654 Location: S. Anchits NOT ok to contact this poster with services or other commercial interests

Like new delta drill press. Floor model.... plenty of power. Almost half price. Call Tim 242-8654 Location: S. Anch.its NOT ok to contact this poster with services or other commercial interests

This is a great 225 Arc welder that includes over $150 in welding rods alone. Has seen little use and as I dont weld anymore, it can take up space in someone elses garage. Location: South Anchorageits NOT ok to contact this poster with services or other commercial interests

New digital micrometer in original box. Worth $97.00! Call 440-7675 if interested. Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

This is a grandfather clock movement testing stand. Call 440-7675 if interested. Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Clock & Watch repair shop going out of business immediately and selling off all assets. All tools, equipment, and othr items in new or like new condition. These tools are top of the line and very expensive but will be sold at bellow market prices. No reasonable offers will be refused. Serious buyers only please. Please call 440-7675 if interested. Location: Anchorageits NOT ok to contact this poster with services or other commercial interests

Contractractor gas compressor $300.00 Call 248-6341 Location: Anchorageits NOT ok to contact this poster with services or other commercial interests